Air and mechanical suspension seating for the construction and marine sectors.
Part number 178059 shown – takes customer’s own pods
Features
Air suspension (manual air valve)
Air suspension with 12 or 24 volt integral compressor
Vertical suspension stroke 125mm (5 inch)
Height and tilt adjustment 60mm (2.25 inch)
Driver weight adjustment 50-150kgs (110-330lbs)
Suspension cover
Moulded control pods to carry hydraulic electronic control joysticks (see more pictures)
Control pod height adjustment 50mm
Control pod height adjustment 40mm (relative to joystick)
Fore and aft adjustment of 160-200mm (relative to control pods)
Backrest angle adjustment
Seat belt to ISO 6683, SAE J386 (anchorage strength 15Kn)
Options
Seat belt widths 50 and 75mm (2 and 3 inch)
5 position lumbar support
Adjustable headrest
Cushion heaters
Adjustable damper
Double damper
Seat sensor switch
Turntable 0-180 degrees
Front or side controls available
Range of fabrics and PVC
Tether belt version to SAE J386, June 1985 (anchorage strength 22Kn)>/li>
TECHNICAL INFORMATION
SIP to ISO5353
Dimensions at mid suspension stroke, middle height adjustment and at mid sliderail adjustment
Indicative dimensions
ADDITIONAL INFORMATION
The great value of the KAB pod seats are that the joysticks move with the driver and the suspension of the seat. This creates a better ergonomic working environment and reduces stretching injuries.
These Models are just part of the extensive 500 series range. Other high back, low back and narrower seats are also available including the new 55/E-1P and 52/E-1P. (see more pictures)

Deluxe Air suspension seating with multiple air cushions for the Construction and Truck sectors
Features
Air suspension (manual air valve)
Air suspension with 12v or 24v integral compressors
125mm vertical suspension stroke (5′)
60mm height and tilt adjustment
Driver weight adjustment 50-150kg (110-330lb)
Suspension cover
3 position air lumbar support
Fore and aft adjustment of 200mm (8′), 10mm increments
Backrest angle adjustment
Vibration performance to ISO 7096
Seat belt to ISO 6683, SAE J386 (anchorage strength 15Kn)
Adjustable damper
2 side bolsters on back cushion and seat cushion – air operated
Thigh support – air operated
Options
Tether belt version to SAE J386, June 1985 (anchorage strength 22Kn)
Seat belt widths 50mm (2′) & 75mm (3′)
Adjustable armrests (50/70/80/100mm widths)
Adjustable headrest
Cushion heaters
Double dampers
Seat sensor switch
Turntable 0 degrees to 180 degrees
Front or side controls available
Range of leather,fabrics and PVC
TECHNICAL INFORMATION
SIP to ISO 5353
Dimensions at mid suspension stroke, at mid-height adjustment and at mid sliderail adjustment
Indicative dimensions
ADDITIONAL INFORMATION
The Air 559ACS is a highly adjustable orthopaedic seat. It is designed to maximise driver comfort and is ideal to relieve stresses on the body. It is particularly suited for professional drivers and equipment operators – especially those who suffer from back pain.

This is a seat especially suited to the Forestry market for use in Harvesters,Forwarders and Feller Bunchers.
It is also ideal for heavy duty Construction and Mining Applications.
It features the extra heavy duty Air 56 suspension for driver protection in severe terrain.
Part Number 186674 shown in Xtreme Havana fabric
Features
EXTRA DUTY 56 SUSPENSION
Air suspension with 24v integral compressor on seat shown 186674
125mm vertical suspension stroke (5′)
60mm height and tilt adjustment (2 1/2′)
Driver weight adjustment 50 – 150kg (110-330lb)
Suspension cover
5 position lumbar support
Fore and aft adjustment of 200mm (8′) in 10mm increments
Backrest angle adjustment
Vibration performance to ISO 7096
Seat belt to ISO 6683, SAE J386 & ISO 3776 (anchorage strength 15Kn)
Options
Air suspension (Manual Air Valve)Air suspension with 12v integral compressor
Tether belt version to SAE J386, June 1985 (anchorage strength 22Kn)
Seat belt widths 50mm (2′) & 75mm (3′)
Adjustable armrests (50/70/80/100mm widths)
Adjustable headrest
Cushion heaters
Adjustable dampers
Double dampers
Seat sensor switch
Turntable 0 degrees – 180 degrees
Side controls available
Range of fabrics and PVC

Part number 182044 shown
This seat fits heavy duty wheeloaders and older excavator models
Features
175mm vertical suspension stroke with integral 75mm seat height adjustment
Integral air compressor
Weight adjustment 50 – 130kg (110-275lbs)
Fore and aft adjustment of 150mm – 15mm steps
Horizontal suspension
5 position lumbar support
Backrest angle adjustment
( 66 degrees / – 72 degrees)
Suspension cover
Meets EEC 78/764 with amendments 83/190 & 88/468 Class I, II & III
Meets flammability standards FMVSS 302 & ISO 3795 (<250mm/min) Seat belt anchorages to ISO 3776, ISO 6683 & SAE J386 Variable upstop Lava grey fabric/grey PVC Double dampers fitted Options Cushion heaters - 12v or 24v Headrest Seat belt to ISO 3776, ISO 6683 & SAE J386 Comfort armrests

The 85/K4 is a high back air suspension seat designed to fit wheel loaders, backhoes, cranes, dumb trucks, telescopic handlers, forestry machines, and bull dozers.
Features
Low natural frequency air suspension
160mm vertical suspension stroke
Manual adjustment for driver weight,with extended weight range for operators of 50 – 120kg
75mm integral seat height adjustment
Fore and aft adjustment – 175mm

A popular Air suspension seat for the agricultural and construction sectors.
Features
Air 85 low frequency suspension
Low back E6 upper
175mm suspension stroke
75mm integral height adjustment
Driver weight range 50-120kg
12v integral compressor
One touch riser
0-10-20‡ swivel
Fore and aft isolator
Mechanical lumbar
Options
Optional 2″ seat belt

Part number 185846 shown
An air seat for Backhoe Loaders.
Features
Air suspension with 12V integral compressor
175mm vertical suspension stroke
Height adjustment 70mm
75mm integral height adjustment
Driver weight adjustment 50-120kgs(110-265lbs)
Ride indicator
Suspension cover
5 position lumbar support
Backrest angle adjustment
180 degree turntable
Options
Air suspension with 24V integral compressor
Fore and aft slide-rail adjustment of 160mm in 10mm steps
Seat belt to ISO 6683, SAE J386 and ISO 3776
Seat belt widths 50mm(2′) and 75mm(3′)
Adjustable armrest (50/70/80/100mm)
Backrest extension
Cushion heaters
Turntable
Document pouch
Seat sensor switch
Range of fabrics and PVC
Double dampers
Variable upstop
For line drawings click on ‘Leaflets’and go to page 3.

Part number 183784 shown
An air seat for the agricultural and construction sectors.
Features
Air suspension with 12V integral compressor
175mm vertical suspension stroke
Height adjustment 70mm
75mm integral height adjustment
Driver weight adjustment 50-120kgs(110-265lbs)
Ride indicator
Suspension cover
5 position lumbar support
Backrest angle adjustment
Options
Air suspension with 24V integral compressor
Fore and aft slide-rail adjustment of 160mm in 10mm steps
Horizontal isolator with damper includes fore and aft adjustment of 150mm
Seat belt to ISO 6683, SAE J386 and ISO 3776
Seat belt widths 50mm(2′) and 75mm(3′)
Adjustable armrest (50/70/80/100mm)
Backrest extension
Cushion heaters
Turntable
Swivel 0-10-2- degrees left or right
Document pouch
Seat sensor switch
Variable up-stop
Range of fabrics and PVC
Double dampers
Adjustable damper (3 positions)
This model is just part of the extensive 800 series range. Other high back, low back and narrower seats are also available.

Heavy duty mechanical construction seat for dozers and tracked type loaders.
Drawing shown for 834K Part number 186823.
Features
175mm vertical suspension stroke with integral 75mm seat height adjustment
Weight adjustment 50 – 130kg (10-275lbs)
Backrest angle adjustment
( 66 degrees / – 72 degrees)
Suspension cover
Meets flammability standards FMVSS 302 & ISO 3795 (<250mm/min) Seat belt anchorages to ISO 3776, ISO 6683 & SAE J386 Pearl Fabric/Grey PVC Options Fore and aft adjustment of 160mm - 10mm steps 5 position lumbar support Comfort armrests Cushion heaters - 12v or 24v Headrest Seat belt to ISO 3776, ISO 6683 & SAE J386 Fore and aft adjustment of 160mm - 10mm steps Swivel device

Part number 182563 shown.
This seat fits heavy duty wheeloaders and older excavator models
Features
175mm vertical suspension stroke with integral 75mm seat height adjustment
Weight adjustment 50 – 130kg (10-275lbs)
Fore and aft adjustment of 160mm – 10mm steps
5 position lumbar support
Backrest angle adjustment
( 66 degrees / – 72 degrees)
Suspension cover
Meets EEC 78/764 with amendments 83/190 & 88/468 Class I, II & III
Meets flammability standards FMVSS 302 & ISO 3795 (<250mm/min) Seat belt anchorages to ISO 3776, ISO 6683 & SAE J386 Variable upstop Krakatoa fabric Options Horizontal suspension Comfort armrests Cushion heaters - 12v or 24v Headrest Seat belt to ISO 3776, ISO 6683 & SAE J386