Part number 182044 shown
This seat fits heavy duty wheeloaders and older excavator models
Features
175mm vertical suspension stroke with integral 75mm seat height adjustment
Integral air compressor
Weight adjustment 50 – 130kg (110-275lbs)
Fore and aft adjustment of 150mm – 15mm steps
Horizontal suspension
5 position lumbar support
Backrest angle adjustment
( 66 degrees / – 72 degrees)
Suspension cover
Meets EEC 78/764 with amendments 83/190 & 88/468 Class I, II & III
Meets flammability standards FMVSS 302 & ISO 3795 (<250mm/min) Seat belt anchorages to ISO 3776, ISO 6683 & SAE J386 Variable upstop Lava grey fabric/grey PVC Double dampers fitted Options Cushion heaters - 12v or 24v Headrest Seat belt to ISO 3776, ISO 6683 & SAE J386 Comfort armrests

Features
Mechanical suspension stroke of 175mm
K1 mid back upper type
Vertical height adjustment 75mm
Weight range: 50-120kg

Space saving and cost effective one piece seat pan for use in static applictions or with XL2,XH2,11 or Air 15 suspensions.
Ideal for vineyard tractors.
Features
Integral, one piece foam & PVC trim
Rigid steel pan
Ventilation and surface drainage grooves
Drainage holes in rear of pan
370mm or 390mm wide
Options
Backrest extension
150mm sliderail adjustment

Space saving and cost effective one piece seat upper for use in static applications or with XL2, XH2, 11 or 15 suspensions.
Features
Integral, one piece foam & PVC trim
Rigid steel pan
Ventilation and surface drainage grooves
Drainage holes in base
Options
Fabric trim
Backrest extension
Seatbelt

The KAB P4 is a space saving and cost effective one piece upper. It can be used for static applications on in conjunction with a KAB XL2, XH2, 800 or 21 suspension module. Sliderails can be fitted if required.
The KAB P4 has a medium height backrest which gives improved comfort and provides more support for the driver’s back.
The construction of the P4 is an integral one piece PVC skin and foam fitted to a rigid steel pan.
For outdoor applications, contoured surface grooves channel any surface water towards drainage holes at the rear of the pan.

The New P6 is a two piece seat pan with moulded vacuum formed skin and foams.
It is ideal for small tractors,small construction machines and ride on mowers.
Features
The P6 is a quality,compact,water resistant seat pan.
It can be used as a static seat or with a range of Air or Mechanical suspensions.
405mm wide.
Options
Sliderail with 150mm travel
Retractable armrests
Seat Belt
Back rest extension
Air 15 suspension
Mechanical 11 and XH2 suspensions
OEM PVC and fabric selections
Meets ISO 3776-2 seat belt requirements

Fixed back medium height upper in PVC trim for use in underground mining vehicles.
Based on the T1 seat upper assembly with Cutaways in the backrest to allow for miners air bottle and torch.
Features
Fixed backrest
PVC trim
Medium height backrest
Options
Slide rails with 150mm or 160mm adjustment.
11 or 52 suspensions.

Features
High quality static seat where a suspension seat may not be required
Backrest angle adjustment
Options
Seat height and tilt adjustment – 60mm or 100mm
Fore and aft adjustment – 160mm
Mechanical or pneumatic lumbar support
Cushion heaters – 12v or 24v
Adjustable headrest
Adjustable pivoting armrests
Seat belt
Range of high quality fabric and PVC trims
Fixed backrest
Document pouch

Features
Back angle adjustment (forwards & rearwards)
Anatomically styled moulded foams
Options
Choice of quality fabrics, PVC or leather
5 position lumbar support
Adjustable pivoting armrests
Headrest adjustable for height and tilt
Retractable seat belt
Sliderail adjustment

High back static upper with low profile seat foam.
Normally used with 71 suspension as Air 712 truck seat.
Features
High quality static seat where a suspension seat may not be required
Uses T4 frame with adjustable backrest
Options
Seat height and tilt adjustment – 60mm or 100mm
Fore and aft adjustment – 160mm
Air lumbar support
Adjustable headrest
Adjustable pivoting armrests
Seat belt
Range of high quality fabric and PVC trims